• MQ1 & MQD1 AC Laminated Traction Electromagnet
  • MQ1 & MQD1 AC Laminated Traction Electromagnet

MQ1 & MQD1 AC Laminated Traction Electromagnet

Structure Electromagnet is AC single phase spiral tube type no cover structure,divided into pull and push type ( pull with N said,push type is indicated by Z), no reset device coil when power off. The electromagnet is composed of two parts of magnetic yoke and armature, When in use, magnetic yoke is arranged on the fixed bracket, and the armature is movably connected in the traction rod. when the attraction coil armature is movably connected in the traction rod by power,when the attraction coil armature is attracted by electricity, through the connecting rod drives the control mechanism.

MQ1 Series Traction electrc

1. Usage

MQ1 series Traction electromagnet applies to control circuit of 5OHz voltage to 380V,it is used for remote control as a variety of operating mechanism of machinery equipment and automatic system.

The electromagnet can reliably work under the following conditions

(1)the altitude does not exceed 2500 meters,the surrounding medium temperature not higher than +40 ℃ and not less than-25 ℃.

(2)Wet month average maximum relative humidity of 90%,at the same time of this month average minimum temperature of +25 ℃,and taking into account due to temperature changes occurred in the product on the surface of the gel.

(3)No significant shake and impact vibration of place.

(4)In the medium without dangerous of explosion,as well as medium without gas and dust which is enough to break the insulation and corrosion of metal(including conductive dust).

(5)Place without hitting of rain and snow.

Apply the following work

Continuous long-term work system Repeated short-term work system

2. Main technical data

3. Exeternality & Installation Dimensions

Below is installation size and Pic1-pic3

4. Using notice

Electromagnet must be installed vertically, the coil voltage 85%ratings and stroke of rated travel,electromagnet may pull in and not let it stay in the middle position.

Electromagnet before installation to use clean cloth to wipe the armature and yoke of the dirt and rust oil.

Copyright © 2023 Wenzhou Chen Intelligent Technology Co., LTD. All Rights Reserved.