YSXCT40 Serials Bistable Rotaty Solenoid

SXCT YSXCT Bi-stable rotary solenoid

Bi-stable rotary solenoid (also called bi – stable rotation angle motor) in performance covers the main function of rotating solenoid and bi-stable self holding solenoid. Due to the high performance permanent magnet and the grain orientation high silicon steel as main material of magnetic circuit, the coil winding adopts pass through winding type, make the main characteristic of the electromagnet parameter “number of ampere turns” and ” magnetic power” in the best condition, when the coil is electrified , the shaft core can immediately produce rotation displacement, after power off, in the effect of magnetic field of permanent magnet,can keep the shaft core at the position of after electric displacement without the need for power input. Rotation and reset is drived by the forward and reverse pulse power supply.

Characteristic:

1. Bistable
Rotate to either side, left/right by changing direction of electrification. Without electrification, the holding power of the permanent magnet holds the position.

2. High output and high response speed
Reciprocation is done by changing the direction of ele ctrification without using spring, which enable the products perform high output and high response speed.

3. Operating angle can be set at wide range
Any operating angle within 30 degree to 100 degree can be set.

4. No movement of axial direction and low operating noise
There is no movement along the axial and alsostopper is located outside,which lower the noise.
For the products which as built-in stopper,the stopper material is examined to lower noise and librations.

5.Long life
No mechanical moving part is used except a ball bearing, which enable the products to have long life.

LABELING

Note: Other DC register value available-Please consult factory.

Typical Data